Thursday, June 18, 2009

How to resset ink cartdridge for Canon IP Series

The Program is intended for service work with

printer Canon iP-series

in Normal mode, on given moment are supported:

iP1200, iP1300, iP1600, iP1700, iP1800, iP2200, iP2500



The Possibilities of the program:

- Extended information on printer, level of the ink in cartridge and container for perfected ink.
- A Print test sample for checking sniffled PG.
- A Clear and deep clear PG printer, cleaning the tray and clear roller.
- A Change of importance of the delay on drying.
- A Change to models of the printer.
- A Reading and unset EEPROM printer.
- A RESET counter level of the ink black and colour cartridge.
- An Unset counter full "main" and "additional" container for perfected ink.

Ink Level - displays the level full ink:
BK - black cartridge. PG40
CY - colour cartridge ink Cyan. PG41
MG - colour cartridge ink Magenta. PG41
YL - colour cartridge ink Yellow.PG41
WM - "main" container for perfected ink.
WP - "additional" container for perfected ink.
Port Name - displays the name of the port of the printer in system.

Port S/N - displays the serial number of the port of the printer.
Power - displays the amount:
ON - an enabling the printer.
OFF - a switching off the printer.


Head Parking - displays the amount of the parkings PG.
Head Cleaning - displays the amount of the usual clear PG.
Head Deep Cleaning - displays the amount of the deep clear PG.

Cartridge Replacement -displays the amount of the change:
BK - black cartridge.
CL - colour cartridge.

The Section Operations.
The Subsection Service - Print Head Cleaning.

Normal - an usual clear PG.
Deep - a deep clear PG.
The Subsection Service - Cleaning.

Roller - a cleaning roller.
BPlate - a clearing the tray.

The Subsection Reset Counter - Ink Counter.
Reset Black - a reset the counter level ink black картриджа.
Reset Color - a reset the counter level ink colour картриджа.

The Subsection Reset Counter - Waste Ink Counter.
Reset Main - a reset the counter level for full ink "main" container for perfected ink.
Reset Platen - a reset the counter level for full ink " of" container for perfected ink.

The Subsection Other - Dry Level.
Set - an installation of specified importance of the delay on drying.
The Subsection Other - Change Model.
Set - an installation specified models a printer.
The Subsection Other - EEPROM Operations.

Read - a reading EEPROM in *.bin file.
Reset - an unset EEPROM to factory installation.

The Subsection Other - Print Head Test.
Pattern #1 - a print test sample 1 for checking sniffled PG.
Pattern #2 - a print test sample 2 for checking sniffled PG.

FAQ :
In thumbnail sketches of the program is written that she works in Normal mode that this for mode? What state of working printer else exist?
Exist three modes in which can work the printers Canon iP-serieses : Normal, Service and Low-level.
Normal - a mode in which is found printer at custom tailorings, in this mode with printer works iPTool.
Service - a mode in which possible execute the service operations by means of buttons of the printer. For turning the printer Canon iP-serieses in "Service" mode it is necessary:
1) Switch off the printer.
2) Press and hold the button of the cancelling/renewing the print.
3) Press and hold the button of the enabling the printer.
4) Release the button of the cancelling/renewing the print.
5) Twice press the button of the renewal/print.
6) Release the button of the enabling the printer.
hereon a certain time will blink the green led (time of the flashing depends on models of the printer), then he fires constantly and printer will move over to "Service" mode.

Low-Level - a mode in which possible execute the low-level operation with EEPROM printer. For turning the printer iP-serieses in Low-Level mode it is necessary:
1) Disconnect the printer from network.
2) Press and hold the button of the cancelling/renewing the print.
3) Include the printer in network.
4) Press the button of the enabling the printer.
5) Release the button of the cancelling/renewing the print. (if system will report on finding "new device", install the driver of the printer, after termination of the installation name the new printer as "Canon iP XXXX Low-Level Mode").
hereon green and orange leds fire constantly and printer will move over to "Low-Level" mode. Leave thereof mode possible only disconnected printer from network.
DOWNLOAD

mc7jb9t4ui

How to resset ink cartdridge for Canon MP Series

The Program is intended for service work with printer

Canon MP series

in Low-Level mode, on given moment are supported:

MP150, MP160, MP170, MP180, MP450, MP460


The Possibilities of the program:

- Extended information on level of the ink in cartridge and container for perfected ink.
- A Reading, record and unset EEPROM printer.
- A RESET counter level of the ink black and colour cartridge.
- An Unset counter full "main" and "additional" container for perfected ink.

Ink Level - displays the level full ink:
BK - black cartridge. PG40
CY - colour cartridge ink Cyan. PG41
MG - colour cartridge ink Magenta. PG41
YL - colour cartridge ink Yellow.PG41
WM - "main" container for perfected ink.
WP - "additional" container for perfected ink.
Port Name - displays the name of the port of the printer in system.

The Subsection Reset Counter - Ink Counter.
Reset Black - a reset the counter level ink black cartridge PG40.
Reset Color - a reset the counter level ink color cartridge PG41.

The Subsection Reset Counter - Waste Ink Counter.
Reset Main - a reset the counter level full ink "main" container for perfected ink.
Reset Platen - a reset the counter level full ink "допролнительного of" container for perfected ink.

The Subsection EEPROM Operations.
Read - a reading EEPROM printer in *.bin file.
Write - a record *.bin file in EEPROM printer.
Reset - an unset EEPROM to factory installation.

FAQ :
In thumbnail sketches of the program is written that she works in Low-Level mode that this for mode? What state of working printer else exist?
Exist three modes in which can work the printers Canon MP-serieses : Normal, Service and Low-level.
Normal - a mode in which is found printer at custom tailorings.

Service - a mode in which possible execute the service operations by means of buttons of the printer. For turning the printer Canon MP-serieses in "Service" mode it is necessary:
1) Switch off the printer.
2) Press and hold the button of the cancelling/renewing the print.
3) Press and hold the button of the enabling the printer.
4) Release the button of the cancelling/renewing the print.
5) Twice press the button of the renewal/print.
6) Release the button of the enabling the printer.
hereon a certain time will blink the green led (time of the flashing depends on models of the printer), then he fires constantly and printer will move over to "Service" mode.

Low-Level - a state of working for low-level operation with EEPROM printer, in this mode with printer works MPTool. For turning the printer MP-serieses in Low-Level mode it is necessary:
1) Disconnect the printer from network.
2) Press and hold the button of the cut-in.
3) Include the printer in network.
4) Press the button of the cancelling/renewing the print.
5) Release the button of the cut-in. (if system will report on finding "new device", install the driver of the printer, after termination of the installation name the new printer as "Canon MP XXX Low-Level Mode").
hereon green and orange leds blink and is ed, then orange fires constantly and printer will move over to "Low-Level" mode. Leave thereof mode possible only disconnected printer from network.

On this moment MPTool will not die to throw the counters a level full container for perfected ink, use Service mode.

For reset the counter level full "main" ("WM") of the container for perfected ink:
1) Translate the printer in "Service" mode.
2) Four times press the button of the cancelling/renewing the seal.
3) Twice press the button of the cut-in.
then switch off-include the printer, counter level full "main" ("WM") of the container for perfected ink will is reseted.

For reset the counter level full additional ("WP") of the container for perfected ink:
1) Translate the printer in "Service" mode.
2) Four times press the button of the cancelling/renewing the seal.
3) Press the button of the cut-in.
4) Press the button of the cancelling/renewing the seal.
5) Press the button of the cut-in.
then switch off-include the printer, counter level full additional ("WP") of the container for perfected ink will is reseted.
Download